For my 1970. Gear is stripped on motor.
I would like new E28 motors if available!Hi Gary. Do you want to replace it with an E28 motor for faster up and down. I will have a few in about 10 days.
Koopman
I'm trolling through all of the parts sales. The car I just bought does not have working back windows on either side. Should I buy the motors or pull the panels/switches and see if there's 12 V going to them first?Hi Gary. Do you want to replace it with an E28 motor for faster up and down. I will have a few in about 10 days.
Koopman
I'm trolling through all of the parts sales. The car I just bought does not have working back windows on either side. Should I buy the motors or pull the panels/switches and see if there's 12 V going to them first?
I'm trolling through all of the parts sales. The car I just bought does not have working back windows on either side. Should I buy the motors or pull the panels/switches and see if there's 12 V going to them first?
I used two 3D printed gears memeber Travis designed and printed and sold me at very reasonable price. They worked well! Another member recently contacted me looking to buy some gears but Travis has not responded to our requests ....previously there was a discussion about 3d printing the gear. where is this discussion now? this is what you need. its not that difficult to take the gearbox apart.