WTB Coolant Bypass Pipe for CSI/CSL

[nate_williams]

I am looking to purchase a coolant bypass pipe for a fuel injected M30, part #
11 53 1 261 156
This will be used for a triple weber DCOE installation.
Thanks, Nate Williams

 

[Ohmess]

Stevehose and I both used a 635 hose. See posts number 2 and 4 in this thread: https://www.e9coupe.com/forum/threads/coolant-flow-diagram-with-carb-mods.27158/#post-207853

 

[Markos]

Check with @Bmwphatpat and @Haseeb.

 

[nate_williams]

Thanks for the info. I am open to any and all advice on parts and configuration. The rest of the car has been restored to a very high degree and the engine should be finished with the same care.

Nate

 

[sfdon]

I have these brazed, re-shaped and then powder coated. Lots of work but really nice when done.
I tried zinc but they usually have too many repairs to go with zinc to look great.

 

[nate_williams]

Lovely, do you have any pics of this pipe installed on the block? Thank you,

Nate

 

[nate_williams]

Lovely, do you have any pics of this pipe installed on the block? Thank you,

Nate

 

[nate_williams]

Sorry,

I had to go back to the diagram to realize you have replicated the pipe I requested.

Nate

 

[HB Chris]

Just flip it left to right and you can see the tabs to mount it to the manifolds.

 

[sfdon]

These are original BMW parts off of injected cars.
Refurbished. Bead blasted, brazed, powdercoated.

 

[Simufly]

I am looking to purchase a coolant bypass pipe for a fuel injected M30, part #
11 53 1 261 156
This will be used for a triple weber DCOE installation.
Thanks, Nate Williams

Thought I had a NOS one stashed away. PM me if intrested

 

[nate_williams]

Simufly, Thank you for the post. I have one being shipped to me this week. I will message you if the condition is poor.

Nate