Polariscsl
Well-Known Member
Following on from my project thread on my new engine and gearbox. I thought I would post specifically about the great service and expertise of Alunox exhausts. They were recommended to me by my engine builder as a company that actually thinks about the solution and performance design rather than just making something that fits.
They have recently designed a fantastic solution to fit equal length 25"primaries around the standard steering box. This far supersedes anything else on the market as you will see:
These manifolds can be recreated off the shelf from jigs made for mine so they won't be going from scratch.
Spec:
1" 5/8 die headers
25" long primaries
304 stainless steel 1.2mm wall
manifold is all on v-bands not slip joints. They can be installed without taking the engine out too.
Stainless 304 2.5 inch system
They also made me a beautiful system to match (pics to follow)
Anyone considering a stainless or even titanium or even inconel solution need to give Leon a call for assistance.
Leon Pierce
www.alunox.co.uk
01978 851100
I am not affiliated - just a happy customer singing the praises of some great engineers!
They have recently designed a fantastic solution to fit equal length 25"primaries around the standard steering box. This far supersedes anything else on the market as you will see:
These manifolds can be recreated off the shelf from jigs made for mine so they won't be going from scratch.
Spec:
1" 5/8 die headers
25" long primaries
304 stainless steel 1.2mm wall
manifold is all on v-bands not slip joints. They can be installed without taking the engine out too.
Stainless 304 2.5 inch system
They also made me a beautiful system to match (pics to follow)
Anyone considering a stainless or even titanium or even inconel solution need to give Leon a call for assistance.
Leon Pierce
www.alunox.co.uk
01978 851100
I am not affiliated - just a happy customer singing the praises of some great engineers!