Galro
Member
Hello again.
As I said previously I am trying to get my old BMW e3 in working order. The car has stood dormant and partly dismantled for years, which has posed a problem given that I don't really have that much knowledge about it. One of the issues I have is with the electronics. More specifically in the engine bay (also some in the interior, but I will focus on that later) where there are a bunch of wires and cables that hang loose and which I don't really know where they are supposed to go. I was therefore wondering whether someone here could help me figure it out?
The lighting is kind of poor here and my phone is struggling to focus on the thin wires, but hopefully it is possible to make out what we are looking at here.
I have circled where the loose wires are:
The wires in the red circle. I thought that this was maybe the ground for the headlight assembly, but I can't for the life of me manage to attach it to the loose wire that comes from the headlight bulb (as far as I can tell it don't fit at all). I also can't see anywhere else where it could go. So what gives? If they are supposed to attached together, how do you do it?
The wire in the green circle. I think this is perhaps for the washer fluid system that are attached to the hood, but I just wanted to be sure.
The wires in the blue circle. The situation here is basically the same as the first set of wires - to me it looks like the ground and it looks like it is supposed to be attached to the headlight assembly, but it don't seem to fit. I also can't see any other places where it could be attached.
As said the pictures aren't the greatest, but hopefully it is possible to understand what we are looking at here.
As I said previously I am trying to get my old BMW e3 in working order. The car has stood dormant and partly dismantled for years, which has posed a problem given that I don't really have that much knowledge about it. One of the issues I have is with the electronics. More specifically in the engine bay (also some in the interior, but I will focus on that later) where there are a bunch of wires and cables that hang loose and which I don't really know where they are supposed to go. I was therefore wondering whether someone here could help me figure it out?
The lighting is kind of poor here and my phone is struggling to focus on the thin wires, but hopefully it is possible to make out what we are looking at here.
I have circled where the loose wires are:
The wires in the red circle. I thought that this was maybe the ground for the headlight assembly, but I can't for the life of me manage to attach it to the loose wire that comes from the headlight bulb (as far as I can tell it don't fit at all). I also can't see anywhere else where it could go. So what gives? If they are supposed to attached together, how do you do it?
The wire in the green circle. I think this is perhaps for the washer fluid system that are attached to the hood, but I just wanted to be sure.
The wires in the blue circle. The situation here is basically the same as the first set of wires - to me it looks like the ground and it looks like it is supposed to be attached to the headlight assembly, but it don't seem to fit. I also can't see any other places where it could be attached.
As said the pictures aren't the greatest, but hopefully it is possible to understand what we are looking at here.