Euro bumper bracket question

[damienh]

Hi All, I have been offered a pair of bumper brackets and need to know if this really is a pair, or two of the same side.

In the picture it looks like there is a slight swist at the front where it attaches to the bumper, and I don’t know if this is an optical illusion, a result of damage, or by design. I can’t find any photos of a pair of brackets from a good angle.

Any guidance greatly appreciated.

Thanks,

Damien

 

[Markos]

Using this:

Early front bumper brackets, plastic vents, vent box and door pockets

I have a few pieces for sale plus shipping or pick up in person. Email robertcelular1[at]gmail.com Front e9 bumper brackets left and right. Straight with some overspray. $300 Wiper mechanism with nice wiper insert splines and both locking nuts $250 E9 early plastic vents no parts number stamped...

e9coupe.com

And a bit of rotation I get this:


Versus this, which tells me that you are buying two of the same side:

 

[eriknetherlands]

agree, you have 2 of the same. Just removed mine yesterday, and the bend at the end should be opposite of each other.
I'll make a pic in an hour for you.

 

[damienh]

Excellent @Markos. Exactly what I thought, just wanted to confirm.

Many thanks @eriknetherlands. If you happen to be in the process of removing them, what would be brilliant would be to get a measurement of the length, because the guy appears to have a few which are not all the same. Markos’ photo is perfect, I will forward it.

 

[Cornishman]

I have a set not fitted to a car at the moment, come and take a look, measure or borrow to get them copied if you want.
A place near Dartford did a cracking job on something else recently.
Regards

 

[eriknetherlands]

Length is 525 mm

 

[damienh]

Perfect thanks for the effort @eriknetherlands, and thanks for the offer Cornishman, hopefully I’m equipped to get what I need from my seller.

 

[Markos]

Markos’ photo is perfect, I will forward it.

It’s actually two photos next to each other.

 

[damienh]

No problem, I worked that out. Thanks.