Design questions for 71-73 coupes

Markos

Well-Known Member
Site Donor
Messages
13,369
Reaction score
7,503
Location
Seattle, WA
So guys, one more question if you have the time -- looking at this car currently on BAT which is from 60, and now I am curious what the difference from a 69 2800cs from years 71-73

https://bringatrailer.com/listing/1969-bmw-2800-3/

A lot of the stuff discussed was part of that transition. Like the seat levers, the tail trim etc. In the grand scheme of things, the car hardly changed over the production run.
 

Gary Knox

E9 Member Emeritus
Site Donor $$
Messages
1,821
Reaction score
743
Location
West Chester, Pennsylvania
A couple of other changes for the '74 (beyond driving board bumpers, and the other stuff above). The front seat bottoms extend about and inch and a half to two inches further than on the earlier cars. Of course, the pleating pattern is horizontal on all seats rather than vertical. Also, additional bracing in the trunk behind the wheel wells. I think '74 was when the rotating knob for the oddment tray (our new favorite part name on this forum) release was used. And, yes the AC receiver drier is mounted differently.

Gary
 
Top