Are the connectors used in Bosch D-jet fuel injection available from anyone? I’m looking for the 4-wire connector to the MAP (or MPS) sensor. Thanks.
D-jet connector
- Thread starter bill
- Start date
Mercedes wiring is a good source.
It can also be 3D printed.
www.wallothnesch.com
It can also be 3D printed.
Reparatursatz für Motorkabelbaum 3,0 Si D-Jetronic bestehend aus Steckern, Hülsen, Gummitüllen und Schrumpfschlauch wird 1x pro Auto benötigt
Reparatursatz für Motorkabelbaum 3,0 Si D-Jetronic bestehend aus Steckern, Hülsen, Gummitüllen und Schrumpfschlauch wird 1x pro Auto benötigt
Somebody also sold rebuild kits. Think it was Wallys.
Just that one?
I can put it in the mail today if you want.
Hi Don: that would be great please…I’m chasing down a hunch the wiring between the MAP and ECU is intermittent. Thanks for your help.
Volvo uses the same connectors, and since they don't have BMW stamped on them (either literally or figuratively) they are about 50% the cost of what you would pay via a BMW supplier.
Many EU (and not only) care were using BOSCH standards but most of them are not providing support for Classic models (except MB).
Maybe BOSCH itself has such parts available somewhere...
Do you have any Volvo part number or web-shop link to share as an example?
E9 specific kits are available for a reasonable price from suppliers in Europe.
Be aware- real Bosch boots are 36.00 EACH.
Be aware- real Bosch boots are 36.00 EACH.
http://irollmot.ipower.com/oscom/pr...d=321&osCsid=43b8b639d956bd5c474ec875f839fab9
If you call Mike he can probably get you the connectors.
Also, NAPA and Beck-Arnley
Protective Boots + Seals - Finjector.com
www.finjector.com