Best supplier for CSL rear exhaust pipe and tip?

Dan Mooney

Well-Known Member
Site Donor $$
Messages
473
Reaction score
605
Location
Austin, Texas
Greetings everyone!

I am currently servicing the CSL after a shamefully long period of inactivity and was surprised to find that I need a new rear exhaust pipe and chrome finisher. Can anyone advise the best place to source a replacement? Do I have to go to W&N or is there someone in the states who can supply?

Thanks and regards to all!
Dan
 

Attachments

  • 8421dm1.jpg
    8421dm1.jpg
    370.5 KB · Views: 99

eriknetherlands

Moderator
Site Donor
Messages
2,776
Reaction score
2,010
Location
Netherlands, Eindhoven area
Tail pipe chrome ends should be 60 mm diameter and about 100 mm long. Current repro's (at least all I saw) were just ~65 or 70 mm long. If you are into originality it thus would be difficult. If you just want a shiny end then you can find them on ebay
 
Last edited:

Dan Mooney

Well-Known Member
Site Donor $$
Messages
473
Reaction score
605
Location
Austin, Texas
Tail pipe chrome ends should be 60 mm diameter and about 100 mm long. Current repro's (at least all I saw) were just ~65 or 70 mm long. If your into originality it thus would be difficult, if you just want a shiny end then you can find them on ebay.
Thanks Erik. Keshav is on the hunt for me. I’m not obsessed about originality, but I think this car deserves to look as original as possible.
Cheers!
Dan
 
Top