I have a bunch of M30 engines and parts...Just got a strange one in yesterday, 1982 casting head with mech fuel pump hole, has 4 bbl carb/manifold and then on the other side thermal reactors...all this in a 1978 633CSi, can't tell what the bottom end is but has bottom bolt oil canister so probably e3/9 engine transplanted....Will try to get some #'s off the block $400 for complete motor, has been sitting a while.
Motronic 1985-87 heads, Complete $200 ea
Motronic Big Valve 87 up heads $250 ea
M90 bottom end, has been sitting forever $500
M106 bottom end also has been sitting forever, was told 18k original miles #6 got some moisture in it in storage...think block would need to be bored..$400
2.8 Euro L Jet motors, have 2 $400 each
3.2? Euro Motronic $400
2800CS carbed motor $400
3.5 Big Valve 1988 in car and running $600
3.5 Big Valve 1988 6 series, tested, with 6 series harness $700
All this stuff is located VIR/NC 27305
Email is best way to reach me [email protected]
Motronic 1985-87 heads, Complete $200 ea
Motronic Big Valve 87 up heads $250 ea
M90 bottom end, has been sitting forever $500
M106 bottom end also has been sitting forever, was told 18k original miles #6 got some moisture in it in storage...think block would need to be bored..$400
2.8 Euro L Jet motors, have 2 $400 each
3.2? Euro Motronic $400
2800CS carbed motor $400
3.5 Big Valve 1988 in car and running $600
3.5 Big Valve 1988 6 series, tested, with 6 series harness $700
All this stuff is located VIR/NC 27305
Email is best way to reach me [email protected]