Hello everyone, I have been working on design to upgrade the fuse box for the early E3/E9 pre 1973 and late E9 post 1973. Here is the thread where I am posting updates on the progress of the design: on post #12, I posted the schematic for the two types of fuse boxes I am working on.
The goal of this thread here is to see if more people are interested so I can plan for making enough of them.
and here are the latest design features.
back view of the assembly:
backside of PCB:
front side:
Fuse box upgrade (prototype)
Hi, my fuse box contacts had some corrosion and fuses were mostly bad. So i looked at different solutions and came up with PCB mounted fuse holders that fit in the original fuse box. I solder the fuse holders to the PCB and soldered copper strips to each side of the fuse holder then soldered...
e9coupe.com
and here are the latest design features.
back view of the assembly:
backside of PCB:
front side: