photos?
Still unable to post photos, even from my new computer....hmmm.
Working on the rear subframe, as this car will not be flared not sure what I can get away with, here are the specs I found on rear track:
CS 56 in
Bav 57.6
e12 57.9
6er 58.5
On the Bav I used early euro 635 arms modified to use Brembo calipers on the stock vented rotor. This time I think I will try the e12 arms with solid rotors and the Brembos with the spacers out. The e12 hubs use wheel bolts so I can use some Bimmerworld race studs in them. I want to use 15x7,5 wheels with maybe 225/45/15 rubber, but if limited to 205/50 on 7's so be it. I have a modified Bav subframe and will use the delrin adjustable bushings I had in the Bav....speaking of, I ran 16x9.5 on the rear of the Bav! With 200hp I was probably slowing the car down with too much wheel and tire...
Thanks
Al Taylor