Georgie22
Member
The driver and passenger seats do not have headrests. Does anyone know if this is standard or they are just missing?
Would you recommend getting some?
Would you recommend getting some?
E9 Csi ECU
- Thread starter Georgie22
- Start date
post pics of engine bay please
Georgie22
Member
Georgie22
Member
post pics of engine bay please
Suggestions…
www.wallothnesch.com
www.wallothnesch.com
Rubber for 3,0 CSI you need 1 for 1 car
Rubber for 3,0 CSI you need 1 for 1 car
Breather hose fits for all models and years of manufacturing you need 1 for 1 car
Breather hose fits for all models and years of manufacturing you need 1 for 1 car
Attachments
I’ve never seen a blue voltage regulator-has it been painted or ? Still has the front ignition orange diagnostic port. Lovely car!
Georgie22
Member
Hi Stevehose, honestly I wouldn't know as I am new to the E9 trip.Can you show me the part you are referring to? This is my fathers car which he gave to me. We had it restored in Madrid, and sadly when we got it back it broke down. That picture of the engine with guy peering into it is the mechanic from the tow truck. This was November 2023, its been in the garage since then. Very frustrating, I want to have it running in next couple of weeks!
Georgie22
Member
Suggestions…
Rubber for 3,0 CSI you need 1 for 1 car
Rubber for 3,0 CSI you need 1 for 1 car
Breather hose fits for all models and years of manufacturing you need 1 for 1 car
Breather hose fits for all models and years of manufacturing you need 1 for 1 car
Hi Sfdon, thanks you saying I need to order these 2 pieces from wallonthnesch? Whats the 1st pic? I understand the 2 parts go on pic 2 and 3?Suggestions…
Rubber for 3,0 CSI you need 1 for 1 car
Rubber for 3,0 CSI you need 1 for 1 car
Breather hose fits for all models and years of manufacturing you need 1 for 1 car
Breather hose fits for all models and years of manufacturing you need 1 for 1 car
Anything else you recommend I order from them?
Georgie22
Member
Breiti
Well-Known Member
Didn't you know anybody with electric and electronic knowledge?
I think your problem is easy to found with somebody with that knowledge.
Are you sure, that the valve is working?
Have you seen it tested outside of the engine?
Or they just clean it.
Breiti
I think your problem is easy to found with somebody with that knowledge.
Are you sure, that the valve is working?
Have you seen it tested outside of the engine?
Or they just clean it.
Breiti
Georgie22
Member
I am not sure, I think they might have just cleaned it, but not sure. I will ask tomorrow.
Your brake fluid reservoir appears to be low on fluid and you should post detailed pics of your engine bay before you place an order with Walloth.
Fritzie
Well-Known Member
Beautiful car looks very original. You do miss the headrest on the chairs.
Neat. I'd like to loan a CSi form the library. Do you have one?
Georgie22
Member
I will try and take some more detailed pictures tomorrow if I can pass by the garage. Will post asap
Don's a busy guy and his posts are sometimes cryptic. But if you study them, you can usually figure out what he is saying.
If you look at the second picture Don posted, there is a nipple without a connetion under the expansion tank cap. Thus, the second item Don suggests is a small hose that attaches to that nipple. It runs pretty much straight downward from there, through the opening in the body where the fuel rail comes up into the engine bay. You then leave it open below that opening. Its purpose is to expel excess coolant from the engine bay. With the setup you have now, if your car overheats excess coolant will shoot directly toward the driver into the firewall, then all over your engine bay.
If you look at the second picture Don posted, there is a nipple without a connetion under the expansion tank cap. Thus, the second item Don suggests is a small hose that attaches to that nipple. It runs pretty much straight downward from there, through the opening in the body where the fuel rail comes up into the engine bay. You then leave it open below that opening. Its purpose is to expel excess coolant from the engine bay. With the setup you have now, if your car overheats excess coolant will shoot directly toward the driver into the firewall, then all over your engine bay.
Last edited:
Shipped-
Georgie22
Member
Thank you! Please pm me your banking details so I can reimburse you the shipping.
Georgie22
Member
Attachments
Looks pretty nice!
you should also order these:
www.wallothnesch.com
you should also order these:
Set of screws for headlight plate complete fits for all models and years of manufacturing you need 1 for 1 car
Set of screws for headlight plate complete fits for all models and years of manufacturing you need 1 for 1 car