Bav3.5
Active Member
When installing the beltline trim, what is the best method to prevent the typical rust that forms where the mounting holes in the body are? A dab a silicon glue to seal out water? Any other suggestions so that rust does form/appear in the future?
(background: my bavaria unfortunately got mildly re-ended at the end of December, and because the quarter panel had to be refinished due to the accident, I had all the paint flaws, rust, etc taken care of from front to back on both sides. Therefore, I'll be reinstalling the plastic clips and the belt trim shortly.)
(background: my bavaria unfortunately got mildly re-ended at the end of December, and because the quarter panel had to be refinished due to the accident, I had all the paint flaws, rust, etc taken care of from front to back on both sides. Therefore, I'll be reinstalling the plastic clips and the belt trim shortly.)