1972 Hazard Switch wiring

[dspoljaric]

Hi all - I'm in the process of trying to figure out which wires connect to which terminals on the rear of my new hazard switch. I'm studying what diagrams I do have, but the diagrams are not consistent, and none of the combinations get my 1972 e3 back to having the brake lights and turn signals back to proper operation.

If you have a diagram or pinout list/spreadsheet for the 1972-73, please post or PM me.

Thank you

 

[bavaria]

dspoljaric, as far as the brake light being inop, my bet is that the problem is either the brake light switch or the bulb holder plates in the tail light assemblies. Test for power at the multi plug for each tail light with the ignition on and the brake pedal depressed.

 

[HB Chris]

The pre 74 e9 one is here, number 51 is the same switch and you can match wire color and terminal numbers

Wiring diagram - late '73 - '75 e9's

I have searched several times for a wiring diagram of our e9's that were built late in '73 through '75 (I have a '74). There are quite a few changes made to these cars, but one specific and easy to spot one is the wiring/mountings for the window motors. The late cars used 2 wire connections...

www.e9coupe.com

 

[dspoljaric]

Thank you both - I'll review both suggestions.