Windshield wiper holder scratches glass

Bmachine

Well-Known Member
Site Donor $
Site Donor $$
Messages
3,525
Reaction score
1,779
Location
Northern California coast
The other day I noticed what looked like a arc shaped scratch on my windshield. Upon further inspection I realized that it was because the wiper blade rubber was old and softer allowing the edges of the wiper frame to touch the glass. And frustratingly, there is a metal tab at each end, presumably to keep the blade from falling off, that is ready to carve into the glass at first opportunity.
This seems like a really poor design so I wonder if I have the correct wiper frame. See photo below.
Anyone else run into that problem?
 

Attachments

  • C979A114-4D04-499A-A949-F27978B35584.jpeg
    C979A114-4D04-499A-A949-F27978B35584.jpeg
    56.9 KB · Views: 119

bert35csi

Well-Known Member
Site Donor
Messages
1,435
Reaction score
142
Location
san francisco
How unfortunate! Looks like the wrong wiper was used. Also, the wiper insert appears to be too short and the metal blade was folded down to keep rubber in place.
 

RMP

Well-Known Member
Site Donor $
Messages
171
Reaction score
65
Location
Boston, MA
Min
The other day I noticed what looked like a arc shaped scratch on my windshield. Upon further inspection I realized that it was because the wiper blade rubber was old and softer allowing the edges of the wiper frame to touch the glass. And frustratingly, there is a metal tab at each end, presumably to keep the blade from falling off, that is ready to carve into the glass at first opportunity.
This seems like a really poor design so I wonder if I have the correct wiper frame. See photo below.
Anyone else run into that problem?
Mine looks like this
EFE12B5B-DAAF-491F-A800-713A7ED9694C.jpeg
 

Bmachine

Well-Known Member
Site Donor $
Site Donor $$
Messages
3,525
Reaction score
1,779
Location
Northern California coast
Grrrrrrr.... Based on your replies it appears that the previous owner put on some non original replacements with that dangerous tab at the end.

Ok, does anyone have a set of of correct wiper arms I can buy? Even black is ok.

Thank you

4E493C7F-77D4-4027-937C-41D60E073F85.jpeg

63761698-6EEC-4ED8-AF22-E59708C6EF42.jpeg

580406AD-F931-4F44-BB61-E2C2C9EFF306.jpeg

16348087-FC1C-4F00-ADF1-286A6CDE75AA.jpeg
 

HB Chris

Well-Known Member
Site Donor $$
Messages
19,418
Reaction score
8,757
Location
Huntington Beach, CA
Bo, looks like you may have e3 wiper arms or even 2002 with a straight tip. Your blade holder is very close to the spoiler on driver wiper. It should have a hook on the end. I think you have 2002 arms.
 

aearch

Well-Known Member
Site Donor $
Messages
4,106
Reaction score
588
Location
pleasant hill , ca
DRATS THE ONLY THING YOU CAN TRY IS GET MCQUIRES 104 HEAVY CUT AND
A DEWALT BUFFER WITH A WOOL PAD AND IT WILL REMOVE ALL THE JUNK AND SMALL SCRATCHES
WITH A GOOD BUFFING
 

Keshav

Well-Known Member
Site Donor $$
Messages
2,761
Reaction score
2,773
Location
Germany
Bo,
You can get the correct ones from Christoph.... these are repros but identical to the originals which generally cost more.

 
Top