classicjunkie
New Member
I have a set of Scheel 400's and am looking for a mounting rail adapter to install them in my 3.0cs. Can anyone help?
WANTED - Scheel seat rails for e9
- Thread starter classicjunkie
- Start date
John S
Well-Known Member
Scheel Adapter rails
I used a set of the E9 Recaro adapters that Aardvarc racing had for sale on e-bay. I don't believe they are listed on the Aardvarc Racing website: http://www.2002parts.com/ They are essentially some flat pieces of steel that you use to bolt your seats to the stock sliders. I had to re-drill them so that the holes would match the Scheel bolt pattern instead of the Recaro bolt pattern. These adapters are different than the ones that Aardvarc sells for mounting Recaro seats in a BMW 2002. I would contact Dave Varco at Aardvarc if you're interested.
Good luck,
John
I used a set of the E9 Recaro adapters that Aardvarc racing had for sale on e-bay. I don't believe they are listed on the Aardvarc Racing website: http://www.2002parts.com/ They are essentially some flat pieces of steel that you use to bolt your seats to the stock sliders. I had to re-drill them so that the holes would match the Scheel bolt pattern instead of the Recaro bolt pattern. These adapters are different than the ones that Aardvarc sells for mounting Recaro seats in a BMW 2002. I would contact Dave Varco at Aardvarc if you're interested.
Good luck,
John
rb1971
Well-Known Member
You might call Stefan at classiccarseats.com - he makes Scheel repros (which I have) and seat rails for those.
i emailed them to ask the question - will post what i find out. i have a set of 400s too that i am getting ready to recover.
'69 2800cs
Well-Known Member
I did the same as John S...the plates are affordable and use the stock sliders. I bought some of the straps for the bottom too, the ones on my Scheels were beat and sagging.
Stefan's stuff is nice too though, can't go wrong there.
Stefan's stuff is nice too though, can't go wrong there.