So the stalk has recently developed a glitch—the directionals work fine, but the entire assembly seems wobbly, and every time the car hits a bump the high beams come on. Its gotten to the point where I have to jam a wadded up piece of paper between the stalk and steering column housing to prevent this from happening. I've never had this apart; is it more of an issue than just a loose fastener? Thanks.
Turn Signal Stalk
- Thread starter NewSixCoupe
- Start date
I would remove the steering wheel and bottom cover first to see if the two screws are loose. Then you'll know if its the stalk itself.
Thanks, Chris. So wheel has to come off to access these screws?
Nope- just some really long bolts accessed from under the column.
Len,
Guess I forget, just had the NK covers off and it is 90% coupe. Take the bottom off as suggested and see if you can get to them.
Guess I forget, just had the NK covers off and it is 90% coupe. Take the bottom off as suggested and see if you can get to them.
Thanks guys.
I know one of the wiper switch screws is blocked by the steering wheel so I suspect the indicator is also
That's what I thought as well, the upper screws.