Rocker panels

[Henry2000cs]

Guys, i m starting my restoration. The rocker panels are gone. Anywhere can i source some? Is the rocker panel for 2000cs the same as 3.0CS?
Do i need front wing rear lower repair panel too? Thanks
Thanks
henry

 

[Laldog]

I bought mine from a German supplier.

http://www.wallothnesch.com/e/frameparts.htm

I was very happy with quality and delivery speed. Of course, you're paying a bit more for shipping.

The rocker panels consist of 3 layers, so make sure you pull them apart before you order your parts. You may need only one (doubtful), but you may get lucky.

Good luck.

 

[IS3FIFTY]

W&N...hmm!

I bought mine from a German supplier.

http://www.wallothnesch.com/e/frameparts.htm

I was very happy with quality and delivery speed. Of course, you're paying a bit more for shipping.

I also got a rocker panel and both 1/4 panels from W&N (among other things). They're always quick to get your order and ship it, however they are not responsive when problems arise. I had an issue with one of the 1/4 panel that got dented during shipping (poor packaging met a hard corner somewhere between their warehouse and my house) and it took 2 months of back and forth for them to finally agree to a 50% refund... barely covered the cost to fix the dent :shock:

 

[Henry2000cs]

I bought mine from a German supplier.

http://www.wallothnesch.com/e/frameparts.htm

I was very happy with quality and delivery speed. Of course, you're paying a bit more for shipping.

The rocker panels consist of 3 layers, so make sure you pull them apart before you order your parts. You may need only one (doubtful), but you may get lucky.

Good luck.

laldog,

so what they sell is 3 layers rocker panel, or i have to buy 3 parts?
cheers

 

[Phemisg]

The portion that goes under the front fender is different