How does this clip go

[aearch]

How do these window trim clips go

So have new inside window wiper
with short slots in it for the clips
but it actually holds by it self
is this supposed to hold it also
then whats up /down
in/ out
thanks alan
so lookin furthr
the small part goes to the door frame
then the center connects the chrome to the trim frame
but why is there the extra big loop part
also as its shown the left goes on the door
right

 

[Honolulu]

though the pic color is kinda washed out, it looks like the clip that goes inside the "J" of the wiper arm. If you think your wiper is adequately secured, you may not use the pictured clip, though you might want to keep it around just in case...

 

[aearch]

no not even close

its the front exterior window trim clip

 

[Rek]

Old post but relevant to me now. How do these little clips fit. has anyone got a photo?

I fitted them how I though and the force on the glass is too much. These are clips on the interior piece

 

[aearch]

i know the teeth side goes up onto the alum with the lines on it you should see on the part scratches where they were before.
then the other side goes down over the door top edge
hope that helps
it holds the window felt assembly

 

[Rek]

Hmmm. No scratches. The chrome piece has been re-finished. It seems that the obvious way is for the big gap to hold the chrome piece to the brush, and that leaves the thinner one for the top of the door, but it presses too far.

 

[Markos]

I thought the teeth side go on the door and scratch the shit out of your new paint.

 

[mark99]

yes one of the worst things on the car, there has to be a better way