6 new pistons m30 3.3L e3 engine

pp

Well-Known Member
Messages
106
Reaction score
2
Location
france
6 new pistons no more available at bmw , these are for special m30 engine of e3
3.3L which is different than a 633 engine ,, 360euro
 

Attachments

  • ebay14 (6).jpg
    ebay14 (6).jpg
    74 KB · Views: 164
  • ebay14 (5).jpg
    ebay14 (5).jpg
    77.6 KB · Views: 357

deQuincey

Quousque tandem...?
Site Donor
Messages
8,371
Reaction score
2,389
Location
BIO - 43°15'46.5"N 2°56'03.7"W
6 new pistons no more available at bmw , these are for special m30 engine of e3
3.3L which is different than a 633 engine ,, 360euro

i will buy them if the size is ok, i need only to know two dimensions:

1 - diameter
2 - high between top of piston and top of piston rod

can you please help with these values ?

see picture, dimensión number "2", is A in the photo



a bientot !
 
Last edited:

m5bb

Well-Known Member
Site Donor $
Messages
2,081
Reaction score
909
Location
Peachtree Corners, GA
Those are the high compression pistons.
Very hard to find.
I'm not an expert but I suspect that those have to be used with a head that will fit the bump.
I have similar pistons made by Paul Burke and they can only be used with the head that has the designation B35.
That doesn't mean just a head from a 3.5 motor but a head from like a 92 735 as an example.

These are PB pistons for 10.5:1.
Pistons_zps7e0663f9.jpg
 

pp

Well-Known Member
Messages
106
Reaction score
2
Location
france
i will buy them if the size is ok, i need only to know two dimensions:

1 - diameter
2 - high between top of piston and top of piston rod

can you please help with these values ?

see picture, dimensión number "2", is A in the photo



a bientot !


yes i will check dimensions and tell you , just to avoid misunderstanding like for wheels !:: pistons are also in ebay and can be sold any time don't argue me later :) ! ,, tnx
 
Top