Wheels are back from being machined and slicks are mounted

Gpdenver

Active Member
Messages
51
Reaction score
20
Picked up the wheels from the shop and had the slicks mounted up to test fit for track days.

Custom spacers will be here tomorrow, then the wheels will be mounted.

Currently running 225/50 16 hoosier R6 on a 16x9 wheel setup. We will see how they fit tomorrow.

Until then, here is a teaser photo:

IMAG0061.jpg
 

Gpdenver

Active Member
Messages
51
Reaction score
20
Well rears are fitted and fit perfectly, front spacers I had made are just a touch too narrow. The fronts are slightly rubbing on the strut, not the wheels but the tires. The machinist will be done with the new spacers tomorrow morning.

Excited that I can fit a 225 in the front. The rear sits nicely, the front needs to come down about 2.5 inches, serious reverse rake going on. Nothing the coilovers cant fix.

Here is a photo of the rears fitted

IMAG0088.jpg
 

Gpdenver

Active Member
Messages
51
Reaction score
20
After adapters, spacers and wheel machining my track wheels are finally on.

Desperately needs coilovers to get the ride height correct, but here they are.

Final specs ended up being 16x9 et 8 front 16x9 et13 rear 225/50 16 Hoosier R6 slicks.

Next up, coilovers, sway bars, headers, 3 inch exhaust and big brake kit.

IMAG0204.jpg


IMAG0195.jpg
 
Top